l2tp rx-connect-speed-upstream-rate

Syntax

[no] l2tp rx-connect-speed-upstream-rate

Release Information

Command introduced in JunosE Release 13.2.0.

Description

Generates the receive (RX) connect speed AVP [38] when the L2C RAM actual upstream rate is sent from AAA to L2TP. The value 0 is sent in the RX Connect-Speed AVP when the L2C is not configured. The no version restores the default behavior, which disables the generation of the RX Connect-Speed AVP which has the L2C RAM actual upstream rate.

Note: The actual upstream rate takes precedence over the configured ATM1483 or VLAN advisory RX speed which takes precedence over the RX Connect-Speed AVP that is generated when RX and transmit-connect speeds are equal.

Mode

Global Configuration

Related Documentation

• atm atm1483 advisory-rx-speed
• l2tp rx-connect-speed-when-equal
• vlan advisory-rx-speed